CMA Model 181 VL, High Temperature Glasswasher, 220V/60Hz/1Ph


Add to Cart:

Add to Cart for Additional Discounts on This Product!

Product Description

The CMA-181VL is a hot water sanitizing, single rack, under-counter dishmachine. It is a standalone machine featuring a self-contained booster heater. The only external connections necessary are power supply, cold water supply, drainpipe, and chemicals.

***Please note this item can have a 3-4 week lead time***

- Uses COLD water only.
- Soft Start feature lowers noise and reduces chance of breakage
- Reduces water vapor for under bar application
- Heat Recovery System promotes faster drying of wares
- Large 11-1/4" height clearance accommodates larger wares.
- Top mounted controls are easy to read and simple to operate.
- 304 Stainless Steel construction
- 20 racks per hour
- .73 gallon of water per cycle or rack
- Safe-T-Temp booster heater for a 70 degrees F rise
- 180 degrees F fresh water final rinse
- Detergent and rinse aid chemical pumps
- 180 seconds cycle
- Removable Stainless Steel pump protection screen for easy cleaning
- Reduced energy costs-uses only cold water supply
- Raised door height makes it easier to remove racks
- 1.0 HP corrosion resistant pump
- Stainless Steel upper and lower wash and rinse arms
- Automatic fill function
- 6" Stainless Steel Legs
- Built in Delime switch.
- Includes 1 glass rack.

Frame Dimensions:
Depth 27" (68.6 Cm)
Width 24" (60.96 Cm)
Height 33-3/8" (84.77 Cm)
Max Clearance For Wares 11-1/4" (28.6 Cm)

Summary Specifications: CMA Model 181 VL
The CMA 181-VL undercounter dishmachine with heat recovery technology reduces hot water vapor at end of cycle, provides hot water (1800F) sanitizing through the use of a built-in booster heater. 180 degrees F final rinse safety system ensures proper temperatures in the final rinse by holding wash cycle in run mode until 180 degrees F rinse temperature is detected. The unit comes standard with upper and lower stainless steel wash and final rinse arms, digital LED temperature gauges and easy to operate controls. The CMA 181-VL is constructed entirely of stainless steel. Uses standard 19-3/4"X19-3/4" glassracks with a 11-1/4" door clearance. This dishmachine only requires a cold water hookup.

Advisory: CMA does not endorse "Tankless On-Demand" water heaters for use on CMA Dishmachine products. CMA does endorse, and highly recommends, the standard "tank" style water heaters, sized properly to handle each particular facility with their water heating requirements.
  • Model: CMA 01669.00

CMA Model 181 VL, High Temperature Glasswasher, 220V/60Hz/1Ph

Copyright 2012-24 © Worldwide Janitor ®