Menu
New Products
|
|
||||||
|
|
|
||||
|
The 414HC Acid Mixing Station has a water flow rate of 4 GPM @ 40 PSI and is a "high concentrate" chemical proportioner for diluting highly corrosive chemicals, such as those used to remove concrete and for aluminum brightening. This acid-resistant venturi injection system uses city water pressure (40 - 80 PSI) to draw and blend a high concentration of acid into the water stream to create up to a 1:1 ratio for dispensing into large containers. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Eliminates manual mixing and optimizes chemical utilization, employee safety and labor efficiency - Achieves strong dilution ratios, up to 1:1 (with water thin chemicals) - Water flow |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 414HC Mixing Station has a water flow rate of 4 GPM @ 40 PSI and is a "high concentrate" chemical proportioner for filling any container with a strong solution. This venturi injection system uses city water pressure (40 - 80 PSI) to draw and blend a high concentration of chemical into the water to create up to a 1:1 dilution ratio. Ball valve activation allows for hands-free dispensing. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Achieves strong dilution ratios, up to 1:1 (with water thin chemicals) - Water flow rate of 4 GPM @ 40 PSI for filling any sized container or equipment - Eliminates manual mixing and optimizes chemical utilization, employee safety and |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 431 Miniature 4-Way Fogger is a damp mist sprayer that uses compressed air (7.4 CFM @ 80 PSI) to draw ready-to-use chemical solution from a nearby container and project it up to 6 feet in 4 directions. This unique miniature fogger can fit into small areas. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Atomizes and sprays chemical solutions using only compressed air - Miniature design fits into small spaces and increases fogger placement opportunities - Projects up to 6' in 4 directions - Venturi action draws pre-diluted chemicals from a nearby container - Optional metering tips can reduce chemical usage and output wetness - Chemical resistant polypropylene |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 455 1-Way Fogger is a dry mist sprayer that uses compressed air (17.5 CFM @ 80 PSI) and venturi action to draw ready-to-use chemical solution from a nearby container and project it up to 35 feet. The adjustable output can wet surfaces at close range or spray mist (fog) into the air to cover exposed surfaces and penetrate hard-to-reach areas. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Atomizes and sprays chemical solutions using only compressed air - Venturi action draws pre-diluted chemical from a nearby container - Projects up to 35' - Dry fog (mist) fills the air and covers exposed surfaces with chemical, including hard-to-reach areas - 455 foggers produce |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 455 1-Way Stainless Steel Fogger is a dry mist sprayer that uses compressed air (17.5 CFM @ 80 PSI) and venturi action to draw ready-to-use chemical solution from a nearby container and project it up to 35 feet. The adjustable output can wet surfaces at close range or spray mist (fog) into the air to cover exposed surfaces and penetrate hard-to-reach areas. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Atomizes and sprays chemical solutions using only compressed air - Venturi action draws pre-diluted chemical from a nearby container - Projects up to 35' - Dry fog (mist) fills the air and covers exposed surfaces with chemical, including hard-to-reach areas - 455 |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 455 2-Way Fogger is a dry mist sprayer that uses compressed air (35 CFM @ 80 PSI) and venturi action to draw ready-to-use chemical solution from a nearby container and project it up to 35 feet in opposite directions. The adjustable output sprays mist (fog) into the air to cover exposed surfaces and penetrate hard-to-reach areas. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Atomizes and sprays chemical solutions using only compressed air - Venturi action draws pre-diluted chemical from a nearby container - Projects up to 35' in opposite directions - Dry fog (mist) fills the air and covers exposed surfaces with chemical, including hard-to-reach areas - 455 foggers |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 455 4-Way Fogger is a dry mist sprayer that uses compressed air (70 CFM @ 80 PSI) and venturi action to draw ready-to-use chemical solution from a nearby container and project it up to 35 feet in 4 directions. The adjustable output sprays mist (fog) into the air to cover exposed surfaces and penetrate hard-to-reach areas. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Atomizes and sprays chemical solutions using only compressed air - Venturi action draws pre-diluted chemical from a nearby container - Projects up to 35' in 4 directions - Dry fog (mist) fills the air and covers exposed surfaces with chemical, including hard-to-reach areas - 455 foggers produce drier |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 455 8-Way Fogger is a dry mist sprayer that uses compressed air (140 CFM @ 80 PSI) and venturi action to draw ready-to-use chemical solution from a nearby container and project it up to 35 feet in 8 directions. The adjustable output sprays mist (fog) into the air to cover exposed surfaces and penetrate hard-to-reach areas. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Atomizes and sprays chemical solutions using only compressed air - Venturi action draws pre-diluted chemical from a nearby container - Projects up to 35' in 8 directions - Dry fog (mist) fills the air and covers exposed surfaces with chemical, including hard-to-reach areas - 455 foggers produce drier |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Internal 5 Gallon Tank Foamer is a low-volume foam applicator with an all stainless steel cart assembly for applying ready-to-use foaming chemicals. Connect compressed air to pressurize the 316L stainless steel ASME rated tank and to inject air into the solution to greatly increase volume and coverage ability. A low-volume of rich, clinging foam is projected on to any surface up close or at distances up to 9 feet. Each fill provides 10 minutes of foaming time. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - 316L stainless steel, ASME rated tank and all stainless steel wetted components ensure durability and years of outstanding performance - Designed for more |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
5 Gallon Internal Tank Sprayer is a chemical spray applicator with an all stainless steel cart assembly for applying ready-to-use chemical solutions to a variety of surfaces. Connect compressed air to pressurize the 316L stainless steel ASME rated tank and project the solution through the hose, wand and fan pattern spray nozzle. Includes 2 spray nozzles which provide either 7 or 15 minutes of spraying time depending on the nozzle used. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - 316L stainless steel, ASME rated tank - Draws pre-diluted chemical from the 5 gallon tank - Alternate nozzles to project a low or medium volume fan pattern spray - Sprays for 7 or 15 minutes |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
5 Gallon LV Tank Foamer is a low-volume venturi foam applicator that uses compressed air to pressurize the water in the tank to create the water pressure to draw and blend chemical concentrate into the water stream. Compressed air is injected into the solution which is projected as a low-volume of rich, clinging foam on to any surface up close or at distances up to 9 feet. Each fill provides 7 minutes of continuous foaming. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Only water is held in the stainless steel tank and compressed air pressurizes the water to drive the venturi foamer - No pre-dilution of chemical is required and no chemical enters the tank - Designed for |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
5 Gallon Internal Tank Solvent Sprayer is a chemical spray applicator with an all stainless steel cart assembly that is suitable for handling many higher-flash-point solvents, including d-limonene. Connect compressed air to pressurize the 316L stainless steel ASME rated tank and project ready-to-use solution through the hose, wand and fan pattern spray nozzle. Includes 2 spray nozzles which provide either 7 or 15 minutes of spraying time depending on the nozzle used. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Solvent resistant components make this unit suitable for many higher-flash-point solvents, including d-limonene - 316L stainless steel, ASME rated tank and all |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
5-Way Ball Valve Mixing Station is an ASSE 1055 certified chemical proportioner that accurately dilutes chemicals to the required ratios and dispenses into any size container. This venturi injection system uses city water pressure (25 - 125 PSI) to draw and blend chemical concentrate into the water stream and precision metering tips to set the dilution ratio for each valve. Ball valve activation allows for hands-free dispensing. Choose a factory-set flow rate for each ball valve at the time of order (Bottle Fill, Low Flow, High Flow). ***Most Lafferty items have a 3-7 day lead time*** ***Please specify flow rate for each valve at the time of ordering in the comments section on your order*** |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 5-Way FPS Transfer System is a chemical transfer system for filling any sized container with chemical concentrate or ready-to-use solution. This unit uses compressed air to power FloJet air pumps which draw 5 chemicals from bulk containers and dispense them into any other containers through 15 foot discharge hoses and trigger guns. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Transfers chemicals from bulk containers into any sized container or cleaning equipment safely and without mess - Increases employee safety and labor efficiency - Transfer chemical concentrate or ready-to-use solution - Quick, easy set up - Requires only compressed air to operate - Pumps |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The 5-Way Push Lever Mixing Station is an ASSE 1055 certified chemical proportioner that accurately dilutes chemicals to the required ratios and dispenses into any size container. This venturi injection system uses city water pressure (25 - 125 PSI) to draw and blend chemical concentrate into the water stream and precision metering tips to set the dilution ratio for each lever. Push Lever Mixing Stations require the user to push and hold the lever to dispense. Choose a factory-set flow rate for each lever at the time of order (Bottle Fill, Low Flow, High Flow). ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Eliminates the need for manual mixing and optimizes chemical |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty 517 Sanitize / A-25 Airless Foam Hose Drop Station
TEXT_PRODUCTS_MODEL915920 Price: $990.16 Weight: 39lbs  |
|
|||
|
517 Sanitize/A-25 Airless Foam Hose Drop Station is a combination applicator for applying one chemical as foam and another as a sanitizing spray, without compressed air. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrates into the water streams to create accurately diluted solutions. Precision metering tips are used to control chemical usage. Foaming chemical solution flows through the foam hose to the "airless" foam wand which draws in atmospheric air to create and project wet, clinging foam at distances up to 6 feet. The sanitizer solution flows through the sanitizer hose and is projected as a fan pattern spray in the lean |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty 517 Sanitize / LC Foam Hose Drop Station
TEXT_PRODUCTS_MODEL915220 Price: $1,233.28 Weight: 43lbs |
|
|||
|
517 Sanitize/LC Foam Hose Drop Station is a combination foam/sanitizer applicator for applying one chemical as foam and another as a sanitizing spray. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrates into the water streams to create accurately diluted solutions using precision metering tips to control chemical usage. Rich, clinging foam is created by injecting compressed air into the foaming solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 12 feet. The sanitizer solution flows through the sanitizer hose and is projected as a |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty 517 Sanitize / Rinse / A-25 Airless Foam Hose Drop Station
TEXT_PRODUCTS_MODEL915925 Price: $1,381.93 Weight: 62lbs |
|
|||
|
517 Sanitize/Rinse/A-25 Airless Foam Hose Drop Station is a combination applicator for applying one chemical as foam, another as a sanitizing spray and for rinsing without compressed air. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrates into the water streams to create accurately diluted solutions. Precision metering tips are used to control chemical usage. Foaming chemical solution flows through the foam hose to the "airless" foam wand which draws in atmospheric air to create and project wet, clinging foam at distances up to 6 feet. The sanitizer solution flows through the sanitizer hose and is projected as a fan pattern |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty 517 Sanitize / Rinse / LC Foam Hose Drop Station
TEXT_PRODUCTS_MODEL915225 Price: $1,597.37 Weight: 58lbs |
|
|||
|
517 Sanitize/Rinse/LC Foam Hose Drop Station is a combination applicator for applying one chemical as foam, another as a sanitizing spray and for rinsing. Dedicated hoses assure no cross mixing of foaming and sanitizing chemistry. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrates into the water streams to create accurately diluted solutions using precision metering tips to control chemical usage. Rich, clinging foam is created by injecting compressed air into the foaming solution to greatly increase volume and coverage ability. The foaming solution is then projected through the foam hose and fan nozzle at distances up to |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty 517 Sanitize / Rinse / LV Foam Hose Drop Station
TEXT_PRODUCTS_MODEL913125 Price: $1,470.97 Weight: 58lbs |
|
|||
|
517 Sanitize/Rinse/LV Foam Hose Drop Station is a combination applicator for applying one chemical as a low volume of foam, another as a sanitizing spray and for rinsing. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrates into the water streams to create accurately diluted solutions using precision metering tips to control chemical usage. A low volume of rich, clinging foam is created by injecting compressed air into the foaming solution to greatly increase volume and coverage ability. The foaming solution is then projected through the foam hose and fan nozzle at distances up to 9 feet. The sanitizer solution is projected |
|
||||
|
|
||||||
