Menu
New Products
|
|
||||||
|
|
|
||||
|
control box is equipped with a 3/4" solenoid and a Jazz Satellite Controller. When the solenoid is triggered by the controller it activates the units that it is attached to. The Jazz Satellite Controller has highly flexible programming settings that can be used to regulate the operation of multiple foggers on a 24/7/365 basis. ***Most Lafferty items have a 3-7 day lead time*** Note: The total air CFM requirement of all the foggers connected to this controller must be less than 460 CFM, which is the air CFM capacity of the controller's 3/4 inch solenoid. (For a lower capacity of up to 180 CFM see controller model #950830.) Key Features: - Controls any combination of 8-Way, 4-Way and 2-Way |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty Fogger Recycling On / Off Controller - 180 CFM
TEXT_PRODUCTS_MODEL950810 Price: $570.35 Weight: 8lbs  |
|
|||
|
When activated, the Fogger Recycling Controller starts fogger operation immediately and runs for a predetermined period of time then switches off for a predetermined period (the Delay cycle), after which the fogging cycle starts again. The complete cycle will repeat until the unit is switched off or reprogrammed. The Run and Delay times are set independently by rotating the arrow on a dial to select the number of hours desired for the cycle --up to 6 hours each. Hash marks indicate 15 minute increments. ***Most Lafferty items have a 3-7 day lead time*** - NOTE: The total air CFM requirement of all the foggers connected to this controller must be less than 180 CFM, which is the air CFM |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty Fogger Single Cycle Controller - 180 CFM
TEXT_PRODUCTS_MODEL950800 Price: $572.06 Weight: 8lbs |
|
|||
|
When activated, the Fogger Single Cycle Controller starts fogger operation immediately and runs for a predetermined period of time - up to 2.84 hours - then switches off. The run time is set by selecting toggle switches that total the number of seconds of desired application time. ***Most Lafferty items have a 3-7 day lead time*** - NOTE: The total air CFM requirement of all the foggers connected to this controller must be less than 180 CFM, which is the air CFM capacity of the controller's 1/2 inch solenoid. (For a higher capacity of up to 460 CFM see controller model #950802.) Key Features: - Controls any combination of 8-Way, 4-Way and 2-Way Pump Fed Foggers - The number of foggers that |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty Fogger Single Cycle Controller - 460 CFM
TEXT_PRODUCTS_MODEL950802 Price: $688.04 Weight: 8lbs |
|
|||
|
When activated, the Fogger Single Cycle Controller starts fogger operation immediately and runs for a predetermined period of time - up to 2.84 hours - then switches off. The run time is set by selecting toggle switches that total the number of seconds of desired application time. The total air CFM requirement of all the foggers connected to this controller must be less than 460 CFM, which is the air CFM capacity of the controller's 3/4 inch solenoid. (For a lower air capacity requirement of 180 CFM and below, see controller model #950800.) ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Controls any combination of 8-Way, 4-Way and 2-Way Pump Fed Foggers - The number of |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The FPS Fogger Chemical Feed System is a compressed air driven system that will deliver neat or pre-diluted chemical solution to Pump Fed Foggers at the appropriate pressure. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Delivers chemical to Pump Fed Foggers at 20 PSI - Pumps chemical concentrate or ready-to-use solution - Use this system in conjunction with a Level Master to ensure a constant supply of RTU chemical solution - Requires only compressed air to operate for quick, easy set up - Output volume depends on the air pressure supplied to the pump - Pump is mounted on a unique quick-release, stainless steel bracket to easily replace pumps - Chemical resistant |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
FPS-MM Asphalt Release Sprayer is a chemical spray applicator for diluting and projecting asphalt release chemicals on to truck beds or tools to prevent asphalt from sticking. This system features a lockable, stainless steel enclosure and uses a cost-effective 1/4" Flojet air-operated, double-diaphragm pump to draw chemical concentrate and water from separate static tanks and blend them to create virtually any dilution ratio (or draw neat chemical). The solution is then projected through the hose, trigger gun, wand and fan nozzle. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Projects asphalt release chemicals on to truck beds and asphalt tools as liquid spray - A |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
FPV-PD Asphalt Release Sprayer is a chemical spray applicator for projecting ready-to-use asphalt release chemicals on to truck beds or tools to prevent asphalt from sticking. This unit features a stainless steel enclosure and uses a cost-effective Flojet air-operated, double-diaphragm pump to draw pre-diluted chemical solution from a static tank and project it through the discharge hose, trigger gun, wand and fan nozzle. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Projects asphalt release chemicals on to truck beds and asphalt tools as a spray - The Flojet AODD pump draws ready-to-use chemical from a static tank - Fan pattern spray for fast, efficient application - |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Freedom 2.5 / 2.5 Foamer is a dual-hose, medium-to-high volume foam applicator for projecting foaming chemicals on to any surface up close or at distances up to 15 feet. This unit features a stainless steel enclosure and uses a rugged 1/2" Sandpiper air-operated, double-diaphragm pump to draw ready-to-use chemical from a user-supplied tank. It injects compressed air into the solution to greatly increase volume and coverage ability and projects rich, clinging foam through the hose, wand and nozzle. Dual discharge assemblies can be used separately or simultaneously. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Draws pre-diluted chemical from a static tank - Dual hose |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Freedom 2.5 Foamer is a medium-to-high volume foam applicator for projecting foaming chemicals on to any surface up close or at distances up to 15 feet. This unit features a stainless steel enclosure and uses a rugged 1/2" Sandpiper air-operated, double-diaphragm pump to draw ready-to-use chemical from a user-supplied tank. It injects compressed air into the solution to greatly increase volume and coverage ability and projects rich, clinging foam through the hose, wand and nozzle. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Draws pre-diluted chemical from a static tank - Rugged 1/2" AODD pump with Santoprene diaphragms - The chemical flow rate is regulated by the |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty Freedom 315 Sanitize/ LC Foam Hose Drop Station
TEXT_PRODUCTS_MODEL943315 Price: $2,910.69 Weight: 75lbs |
|
|||
|
Freedom 315 Sanitize / LC Foam Hose Drop Station is designed to overcome low or fluctuating water pressure issues, and is a medium volume venturi applicator for applying one chemical as foam and another as a sanitizing spray. It accepts incoming water pressure from 20 to 60 PSI then regulates and maintains the pressure for consistent output. Also, it is adaptable to draw static water from a supply tank. ***Most Lafferty items have a 3-7 day lead time*** A lockable, stainless steel cabinet protects components, including the polypropylene foamer and sanitizer bodies, which draw and blend chemical concentrates into the water stream to create accurately diluted solutions. Compressed air is |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Freedom Super XV Foamer is an extra high volume foam applicator that projects pre-diluted or neat chemicals at distances up to 40 feet. A stainless steel 1" compressed-air-operated pump, with Santoprene diaphragms, is used to draw chemical from a nearby container. Compressed air is injected into the solution to greatly increase volume and coverage ability. An incredible volume of rich clinging foam is projected through the 100' hose and zero degree nozzle. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Draws pre-diluted or neat chemical from a static tank - Projects an extra-high volume of rich, clinging foam which increases chemical contact time and effectiveness - |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Freedom XV Foamer is a high volume foam applicator for projecting foaming chemicals on to any surface up close or at distances up to 25 feet. This unit features a stainless steel enclosure and uses a rugged 1/2" Sandpiper air-operated, double-diaphragm pump to draw ready-to-use chemical from a user-supplied tank. It injects compressed air into the solution to greatly increase volume and coverage ability and projects rich, clinging foam through the hose, wand and nozzle. ***Most Lafferty items have a 3-7 day lead time*** Key Features: - Draws pre-diluted chemical from a static tank - Rugged 1/2" AODD pump with Santoprene diaphragms - The chemical flow rate is regulated by the foamer body |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Gemini Level Master is a water driven chemical proportioner that blends 2 chemicals and automatically maintains a constant supply of ready-to-use solution in a paired tank (sold separately). The unique Gemini "double venturi / double float" injection system combines two completely separated venturis in one injector body and uses city water pressure (35 - 100 PSI) to draw and blend two chemical concentrates into the water stream independently so that the chemicals never mix until they are diluted. The system activates when the solution in the tank drops below a pre-set level, replenishes at 2 GPM @ 40 PSI, and cycles continuously. A secondary fail-safe float prevents overfilling. ***Most |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Gemini Level Master with Stainless Steel Bracket is a water driven chemical proportioner that clamps to the rim of a user-supplied tank to blend 2 chemicals and automatically maintain a constant supply of ready-to-use solution. The unique Gemini "double venturi / double float" injection system combines two completely separated venturis in one injector body and uses city water pressure (35 - 100 PSI) to draw and blend two chemical concentrates into the water stream independently so that the chemicals never mix until they are diluted. The system activates when the solution in the tank drops below a pre-set level, replenishes at 2 GPM @ 40 PSI, and cycles continuously. A secondary |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Gemini Level Master with Stainless Steel, Horizontal Mounted Bracket is a water driven chemical proportioner that bolts to the top of user-supplied tank and automatically maintains a constant supply of ready-to-use solution. The unique Gemini "double venturi / double float" injection system combines two completely separated venturis in one injector body and uses city water pressure (35 - 100 PSI) to draw and blend two chemical concentrates into the water stream independently so that the chemicals never mix until they are diluted. The system activates when the solution in the tank drops below a pre-set level, replenishes at 2 GPM @ 40 PSI, and cycles continuously. A secondary fail-safe |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Gemini Model 150 Mixing Station is a unique, 7 GPM @ 40 PSI high-volume chemical proportioner that will simultaneously dilute and blend two chemical concentrates into one accurately diluted solution and quickly dispense it into larger containers and equipment. The unique Gemini "double venturi" injection system incorporates two completely separated venturis in one injector body and uses city water pressure (35 - 125 PSI) to draw and blend 2 chemical concentrates into the water stream independently so that the chemicals never mix until they are diluted. Dilution ratios are controlled independently with precision metering tips. Ball valve activation allows for hands-free dispensing. |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
The Gemini Model 25 Mixing Station is an ASSE 1055 certified chemical proportioner that will simultaneously dilute and blend two chemical concentrates into one accurately diluted solution and dispense it into any size container. The unique Gemini "double venturi" injection system incorporates two completely separated venturis in one injector body and uses city water pressure (25 - 125 PSI) to draw and blend 2 chemical concentrates into the water stream independently so that the chemicals never mix until they are diluted. Dilution ratios are controlled independently with precision metering tips. Ball valve activation allows for hands-free dispensing. ***Most Lafferty items have a 3-7 day |
|
||||
|
|
||||||
|
|
||||||
|
|
Lafferty Gemini Model 25 Push Lever Mixing Station
TEXT_PRODUCTS_MODEL982025PL Price: $389.53 Weight: 8lbs |
|
|||
|
The Gemini Model 25 Push Lever Mixing Station is an ASSE 1055 certified chemical proportioner that will simultaneously dilute and blend two chemical concentrates into one accurately diluted solution and dispense it into any sized container. The unique Gemini "double venturi" injection system incorporates two completely separated venturis in one injector body and uses city water pressure (25 - 125 PSI) to draw and blend 2 chemical concentrates into the water stream independently so that the chemicals never mix until they are diluted. Dilution ratios are controlled independently with precision metering tips. Push Lever Mixing Stations require the user to push and hold the lever to dispense. |
|
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
Lafferty GH Hose, Blue, 1/2" x 50' ***Most Lafferty items have a 3-7 day lead time*** Part Number: 804450B | |
||||
|
|
||||||
|
|
||||||
|
|
|
||||
|
Lafferty GH Hose, Blue, 1/2" x 75' ***Most Lafferty items have a 3-7 day lead time*** Part Number: 804475B | |
||||
|
|
||||||
