Product Description
Alcojet, 300 lbs drum
Alcojet is a nonionic, low foaming cleaner for use in lab-ware washers, parts washers, power-spray systems, for manual and ultrasonic cleaning. It is a corrosion inhibited formula recommended for glassware, metals, plastic, ceramic, porcelain, rubber and fiberglass. Alcojet is free rinsing for reliable results with no interfering residues. USDA authorized. Dilute 1:200. pH 12
Alconox products require 2-5 day handling time.
Used to clean: Healthcare instruments, laboratory ware, sampling apparatus, plate glass,
animal cages, electronic components, pharmaceutical apparatus, cosmetics manufacturing
equipment, metal castings, forgings and stampings, industrial parts, tanks and reactors.
Authorized by USDA for use in federally inspected meat and poultry plants. Passes
inhibitory residue test for water analysis. FDA certified.
Used to remove: Soil, grit, grime, slime, grease, tars, resins, fats, oils, blood, tissue, inorganic
residues, particulates, chemicals and solvents.
Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless
steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as
copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable.
Cleaning method: Laboratory warewashers, water-sterilizers, washer-sanitizers, cart washers,
cage washers, spray washers, electrocleaning, ultrasonic cleaners, flow through cleanin-
place. Manual cleaning if proper skin and eye protection is used.
Directions: Follow machine manufacturer’s directions and use machine’s powder detergent
receptacles. In general, use 1/2 - 1% hot water wash cycle solutions (1 1/4 - 2 1/2 Tbsp. per
gal., 3/4 - 1 1/4 oz. per gal. or 5-10 grams per liter—most machines need 2 1/2 oz. added at a
typical 2 gal. wash cycle). For manual, soak, circulate, or ultrasonic use, make a 1% solution
in warm or hot water. For abrasive scrubbing, make paste. For difficult soils, raise water
temperature and use more detergent. Wear protective gloves and eyewear for manual cleaning.
RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final
or all rinsing in distilled, deionized, or purified water. For food contact surfaces, rinse with
potable water. Used on a wide range of glass, ceramic, plastic, and metal surfaces. Corrosion
testing may be advisable.
Physical Data - Typical value
pH of 1% solution - 11.0%
Flash Point (degrees F) - None
Phosphate Content (as Phosphorus) - 8.7%
Organic Carbon (% calculated w/w) - 1.5%
Surface Tension 1% Sol’n (Dyne/cm) - 34%
Percent active ingredients - 100%
Color: White
Form: Powder
Solubility in Water: Greater than 10% (w/w)
Hard Water Effectiveness: Highly Effective
Biodegradability: Biodegradable
Foam Tendency: Low Foaming
Shelf Life: Two years from the date of manufacture
Chemical Description:
Alcojet is a blend of sodium silicate, a mixture of complex phosphate, concentrated organic
chlorine, sodium carbonate, and an alkylalkoxylate. Alcojet is biodegradable and water soluble.
The phosphate content is 8.7% expressed as phosphorus. Alcojet is non-ionic.
Cleaning Validation Methods:
Test a parameter of rinse water before and after rinsing the cleaned surface, or test the clean
surface. No significant change in the parameter indicates no detectable residue. Parameters
measured include: pH, conductivity, resistance, spectrographic methods, sodium concentration,
phosphorus concentration, surface tension, and surface analysis. For details, see the
Pharmaceutical Validation References at www.alconox.com.
Health Safety Information:
OSHA Hazardous Ingredients: None
Flammability: Non-flammable
Latex Content: None in detergent, packaging materials or adhesives.
Oral Toxicity: LD50 > 5000 mg/kg oral rat
No ingredient defined as an oral toxicant by OSHA
Eye Irritation: Moderate eye irritant if not rinsed
Inhalation Toxicity: Non-irritating solution, powder a potential irritant
VOC Content: 0%
Carcinogenicity:
NTP = No IARC = No OSHA = No
All ingredients in Alcojet are listed in TSCA inventory. USDA NSF cat A1
Pharmaceutical cleaning validation for residue identification and detection methods for Alcojet:
Total Organic Carbon (TOC)
Conductivity
Phosphate titration
For more information on these pharmaceutical validation methods, see: https://worldwidejanitor.com/alconox-docs/PCV42301.pdf.
Alcojet MSDS Sheet 9/8/2014 updated
Availability:
4 lbs boxes [1404-1]
Case of 9 (qty), 4 lbs boxes [1404]
25 lbs cartons [1425]
50 lbs cartons [1450]
100 lbs drums [1401]
300 lbs drums [1403]
|
