Product Description
10-gallon SLA battery-powered, portable, pre-mix foam unit with heavy duty trigger gun.
FEATURES:
- draws from pre-mixed solution
- battery operated
- up to 45 minutes of continuous use from one charge
- trigger gun handle with foam fan tip
- hinged back plate provides tool-free access to components
- natural color tank for easy visibility of product levels
- hinged lid
- color coding options:
- lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
- discharge hose ? 4 colors (BL, GN, YL, RD)
- integrated hose wraps
- front-facing drain
SPECS:
power type
SLA battery
battery charge time (from full depletion)
8 hours
battery run time (from full charge)
45 minutes of continuous use
chemical pickup type
draws from pre-mixed solution
number of products unit can draw from
one product
suction line length/diameter
3/8 in. (9.5 mm) inside diameter)
capacity
10 gallons (37.9 liters)
discharge hose length/diameter
12 ft. (3.7 m) hose, with 3/8 in. (9.5 mm) inside diameter
discharge wand/tip type
polypropylene trigger handle with 50? fan tip
output distance
5-6 ft. (1.5-1.8 m)
output volume
4-5 gal/min (15.1-18.9 l/min) of foam
flow rate*
up to 1 gal/min (3.8 l/min)
pump seals
Santoprene, Viton, or Kalrez
wheel type
two 10 inch non-marking wheels
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
REQUIREMENTS:
liquid temperature range
40-100?F (4.4-37.8?C)
electrical requirements
120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only
operating voltage
12 VDC
chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
FI-10N PUMP SEAL MATERIAL
- Santroprene (standard) -B
- Viton (V)
- Kalrez (K)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- FI-10N-B (standard unit with Santoprene pump seals)
- FI-10NV-B (unit with Viton pump seals)
Other available options:
- color coding ? lid +/or discharge hose
WHAT'S INCLUDED:
- complete foam unit with discharge hose and wand
- battery charger
- user manual
|
