Product Description
30 gallon air-powered, portable, pre-mix foam unit. Configurable with Viton, Kalrez, or Santoprene seals and color options for hose and lid.
FEATURES:
- draws from pre-mixed solution
- powered by compressed air
- no assembly required
- hinged back plate provides tool-free access to components
- quick-change pump
- natural color tank for easy visibility of product levels
- hinged lid
- front-facing drain
- in-line strainer to protect pump from debris
- integrated hose hangers
- anti-kink hose protection
color coding options:
- lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
- discharge hose ? 4 colors (BL, GN, YL, RD)
SPECS:
power type
compressed air
chemical pickup type
draws from pre-mixed solution
number of products unit can draw from
one product
suction line length/diameter
3/8 in. (9.5 mm) inside diameter
capacity
30 gallons (113.6 liters)
discharge hose length/diameter
30 ft. (9 m) hose, with 3/4 in. (19 mm) inside diameter
discharge wand/tip type
7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
output distance
25-30 ft. (7.6-9.1 m)
output volume
20-45 gal/min (75.7-170.3 l/min) of foam
flow rate*
2-2.5 gal/min (7.6-9.5 l/min)
pump seals
Santoprene, Viton, or Kalrez
wheel type
two 10 inch (25.4 cm) non-marking wheels, two 5 inch (12.7 cm) casters, one with lock
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
REQUIREMENTS:
compressed air
40-80 psi (2.8-5.5 bar) with 5-10 cfm (141.6-283.2 l/min)
liquid temperature range
40-100?F (4.4-37.8?C)
chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
FI-30N PUMP SEAL MATERIAL
- Santroprene (standard)
- Viton (V)
- Kalrez (K)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- FI-30N (standard unit with Santoprene pump seals)
- FI-30NV (unit with Viton pump seals)
Other available options:
- fan tip
- color coding ? lid +/or discharge hose
- water separator
- air hose
WHAT'S INCLUDED:
- complete foam unit with discharge hose and wand
- user manual
|
