Product Description
50 gallon air-powered, portable, pre-mix foam unit with a smart foam wand. Configurable with Viton, Kalrez, or Santoprene seals and lid color options.
FEATURES:
- equipped with Smart Technology
- safer to store and maintain
- protects user and surroundings from chemical exposure in the event of a fall or accident
- gives you more control and flexibility
- easy ON/OFF operation
- handle and wand are tough but lightweight, with fan tip and built-in zero tip
- draws from pre-mixed solution
- integrated hose hangers
- powered by compressed air
- hinged back plate provides tool-free access to components
- quick-change pump
- natural color tank for easy visibility of product levels
- hinged lid
- color coding options: lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
- in-line strainer to protect pump from debris
- front-facing drain
- includes smart handle extension attachment (item number: SM-EA) ? helps users foam the underside of equipment and other hard-to-reach areas
SPECS:
power type
compressed air
chemical pickup type
draws from pre-mixed solution
number of products unit can draw from
one product
capacity
50 gallons (189.3 liters)
discharge hose length/diameter
50 ft. (15.2 m) bonded hose, with 5/8 in. (15.9 mm) and 1/4 in. (6.4 mm) inside diameters
discharge wand/tip type
ultra high molecular weight (UHMW) polyethylene handle and wand, with 65? fan tip and built-in zero tip
output distance
8-12 ft. (2.4-3.7 m)
output volume
WITH ZERO TIP: 20-32 gal/min (75.7-121.1 l/min) of foam
WITH FAN TIP: 20-32 gal/min (75.7-121.1 l/min) of foam
flow rate*
2 gal/min (7.6 l/min)
pump seals
Santoprene, Viton, or Kalrez
wheel type
two 10 inch (25.4 cm) non-marking wheels, two 5 inch (12.7 cm) casters, one with lock
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
REQUIREMENTS:
compressed air requirements
40-80 psi (2.8-5.5 bar) with 5-10 CFM (141.6-283.2 l/min)
liquid temperature range
40-100?F (4.4-37.8?C)
chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
FI-50N PUMP SEAL MATERIAL
- Santroprene (standard) ? SM
- Viton (V)
- Kalrez (K)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- FI-50N-SM (standard unit with Santoprene pump seals)
- FI-50NV-SM (unit with Viton pump seals)
Other available options:
- color coding ? lid
WHAT'S INCLUDED:
- complete unit with discharge hose and wand
- smart handle extension attachment (item number: SM-EA) - helps users foam the underside of equipment and other hard-to-reach areas.
- user manual
|
