Product Description
Wall mounted foam drop station that draws pre-mixed solution from a central system.
FEATURES:
- Drop station for central foam system
- Pump and nozzles sold separately
- One central pump distributes pre-mixed solution through header system
- Powered by compressed air
- Stainless steel ball valve and wand
- Stainless steel fluid fittings
- Discharge hose ? 4 colors (BL, GN, YL, RD)
- Ability to padlock to box
SPECS:
power type
central system
chemical pickup type
supplied with pre-mixed solution from a central system
number of products unit can draw from
supplied with one product
discharge line length/diameter
50 ft. (15.2 m) hose, with 3/4 in. (19 mm) inside diameter
discharge wand/tip type
7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
output distance
25-30 ft. (7.6-9.1 m)
output volume
20-45 gal/min (75.7-170.3 l/min)
flow rate*
2 gal/min (7.6 l/min)
product height
18 inches (45.7 cm)
tubing/fitting sizes
4 ft. (1.2 m) chemical inlet hose with 1/2 in. (12.7 mm) inside diameter and 1 lb check valve
*dilution rates and flow rates given are based on chemical viscosity of water and factory air pressure settings.
REQUIREMENTS:
Compressed air requirements
40-80 psi (2.8-5.5 bar) with 5-10 cfm (141.6-283.2 l/min)
Liquid temperature range
40-100?F (4.4-37.8?C)
Central system requirements
pre-mixed solution must be supplied by a properly sized header system at 2 gpm and 40-80 psi (2.8-5.5 bar)
Chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
FI-STATION
Discharge Hose Color:
- Blue
- Green
- Yellow
- Red
WHAT'S INCLUDED:
- Control box
- Hose and hanger
- Wand
- User manual
- Pump sold separately
- Model: FOAMIT 900.FI.STATION
|
