$1,785.73
Add to Cart for Additional Discounts on This Product!
Product Description
Wall mounted, air-powered, concentrate foam unit for 2-part products. Draws from two concentrated products simultaneously and mixes on the fly.
FEATURES:
- Pump provides reliable dilution, regardless of water pressure fluctuations
- Powered by compressed air
- Draws from two concentrated products simultaneously
- Ideal for 2-part products that need to be mixed on the fly
- Dilutes at a rate of 8:1 to 150:1 (water:chemical) for each product
- Requires water connection with 10-100 psi (0.7-6.9 bar) incoming water pressure
- Anti-kink hose protection
- Designed for easy maintenance ? quick change pump
- Customization options
- Pump seal material for compatibility
- Color coding ? discharge hose ? 4 colors (BL, GN, YL, RD)
- Foam wand style ? zero degree tip or fan tip
- Stainless steel or all-poly fluid fittings
SPECS:
power type
compressed air
chemical pickup type
draws from concentrated product
dilution ratio range (water:chemical)*
8:1 to 150:1
number of products unit can draw from
two products simultaneously
suction line length/diameter
8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
discharge line length/diameter
50 ft. (15.2 m) hose, with 3/4 in. (19 mm) inside diameter
discharge wand/tip type
7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
output distance
25-30 ft. (7.6-9.1 m)
output volume
20-45 gal/min (75.7-170.3 l/min)
flow rate*
2 gal/min (7.6 l/min)
pump seals
Santoprene, Viton, or Kalrez
product height
18 in. (45.7 cm)
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
REQUIREMENTS:
Compressed air requirements
40-80 psi (2.8-5.5 bar) with 5-10 cfm (141.6-283.2 l/min)
Water requirements
10-100 psi (0.7-6.9 bar)
Backflow prevention is required ? consult local plumbing ordinances for more information
Liquid temperature range
40-100?F (4.4-37.8?C)
Chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact or customer service department.
|
