$1,539.80
Add to Cart for Additional Discounts on This Product!
Product Description
Electric, portable, pre-mix foam unit with on-board compressor. Comes with 25ft. of coiled discharge hose to maximize your reach.
FEATURES:
- draws from pre-mix solution
- powered by 120 VAC electricity
- 25 ft. (7.6 m) coiled twin-line tubing for convenient use
- 65 degree fan tip for increased coverage
- on-board compressor
- compact design
SPECS:
power type
electricity
chemical pickup type
draws from pre-mixed solution
number of products unit can draw from
one product
suction line length/diameter
6 ft. (1.8 m) hose with 1/4 in. (6.4 mm) inside diameter)
discharge hose length/diameter
25 ft. (7.6 m) coiled twin-line tubing, with 1/4 in. (6.4 mm) outside diameter
discharge wand/tip type
polypropylene trigger handle with 65? fan tip
output distance
4-6 feet (1.2-1.8 m)
output volume
6 gal/min (22.7 l/min) of foam
flow rate*
1 gal/min (3.8 l/min)
pump seals
Santoprene, Viton, or Kalrez
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
REQUIREMENTS:
liquid temperature range
40-100?F (4.4-37.8?C)
electrical requirements
120 VAC at 60 Hz, 10 amps (GFCI protected outlet)
operating voltage
120 VAC
chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
FI-JR PUMP SEAL MATERIAL
- Santoprene (standard)
- Viton (V)
- Kalrez (K)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- FI-JR (standard unit with Santoprene pump seals)
- FI-JRV (unit with Viton pump seals)
WHAT'S INCLUDED:
- complete unit with discharge hose and wand
- user manual
|
