Product Description
10 gallon air-powered, portable, pre-mix fog unit with two nozzles. Configurable with Viton, Kalrez, or Santoprene seals and lid color options.
FEATURES:
- draws from pre-mixed solution
- powered by compressed air
- 2 nozzles mounted on the unit handle
- droplet size: 15 microns at 50 psi (3.4 bar)
- polypropylene and kynar nozzle construction
- a full tank of solution will supply the unit for approximately 1.5 hours
- optional timer with delay functionality ? start unit and leave the room before it begins fogging
- hinged back plate provides tool-free access to components
- quick-change pump
- natural color tank for easy visibility of product levels
- hinged lid
- color coding options: lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
- front-facing drain
- in-line strainer to protect pump from debris
SPECS:
power type
compressed air
chemical pickup type
draws from pre-mixed solution
number of products unit can draw from
one product
suction line length/diameter
3/8 in. (9.5 mm) inside diameter
capacity
10 gallons (37.9 liters)
flow rate*
3.7 gal/hour (14 l/hour) at each nozzle
pump seals
Santoprene, Viton, or Kalrez
droplet size
15 microns at 50 psi (3.4 bar)
coverage area**
1 liter of solution will cover approximately 1000 cubic feet (28.3 cubic meters), up to system max of 47,320 cubic feet (1340 cubic meters)
height
41 inches (104 cm)
run time from full tank**
approx. 1.5 hours
number of nozzles
2 nozzles
wheel type
two 10 inch (25.4 cm) non-marking wheels
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
**area covered and run time may vary based on humidity, air flow, and product used.
REQUIREMENTS:
compressed air
50 psi (3.4 bar) with 7 cfm (198.3 l/min)
liquid temperature range
40-100?F (4.4-37.8?C)
chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
MU-10N PUMP SEAL MATERIAL
- Santroprene (standard) -2
- Viton (V)
- Kalrez (K)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- FG-10N-2 (standard unit with Santoprene pump seals)
- FG-10NV-2 (unit with Viton pump seals)
Other available options:
- color coding ? lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
- timer with delay functionality
WHAT'S INCLUDED:
- complete unit with 2 nozzles
- user manual
|
