Product Description
Powered by a built in 120 VAC electric compressor this unit applies disinfectants and other chemistry with a handheld wand.
FEATURES:
- Draws from pre-mixed solution
- Powered by electricity (120 VAC)
- Handheld wand with 25 ft. (7.6 m) coiled discharge hose
- See through tank ? 15 gallon (56.8 liter) capacity
- Built in air compressor
- Hinged back plate provides tool-free access to components
- Quick-change pump
- Hinged lid
- Lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
- Front-facing drain
- In-line strainer to protect pump from debris
SPECS:
power type
electricity
chemical pickup type
draws from pre-mixed solution
number of products unit can draw from
one product
suction line lenght/diameter
3/8 in. (9.5 mm) inside diameter
capacity
15 gallons (56.8 liters)
discharge hose length/diameter
25 ft. (7.6 m) coiled twin-line tubing 1/4 in. (6.4 mm) outside diameter
discharge wand/tip type
polypropylene trigger handle with 65? fan tip
output distance
1-3 ft. (0.3-0.9 m)
output volume
2.1 gal/min (7.9 l/min)
flow rate*
0.3 gal/min (1.1 l/min)
run time from full tank**
approx. 57 minutes
wheel type
two 10 inch (25.4 cm) non-marking wheels two 5 inch (12.7 cm) casters, one with lock
pump seals
Santoprene, Viton, or Kalrez
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
**area covered and run time may vary based on humidity, air flow, and product used.
REQUIREMENTS:
Liquid temperature range
40-100?F (4.4-37.8?C)
Electrical requirements
120 VAC at 60 Hz, 10 amps (CFCI protected outlet)
Operating voltage
120 VAC
Chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
MU-AC-15N
PUMP SEAL MATERIAL:
- Santoprene (standard)
- Viton (V)
- Kalrez (K)
WAND TYPE:
- Extended (standard)
- Short (PSGN130)
HOSE LENGTH:
- 25ft (standard)
- 50ft (H50)
- 75ft (H75)
- 100ft (H100)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- MU-AC-15N (standard unit with Santoprene pump seals and extended wand)
- MU-AC-15NV-PSGN130 (unit with Viton pump seals and short wand)
- MU-AC-15NV-PSGN130-H50 (unit with Viton pump seals, short wand, and 50ft hose length)
other available options:
- color coding ? lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
WHAT'S INCLUDED:
- Complete unit with discharge hose and wand
- User manual
- Model: FOAMIT 9.FOG.MU.AC.15N.PSGN130
|
