$2,019.45

Product Description

Powered by a built in 120 VAC electric compressor this unit applies disinfectants and other chemistry with a handheld wand.

FEATURES:

- Draws from pre-mixed solution
- Powered by electricity (120 VAC)
- Handheld wand with 50 ft. (15.2 m) twin-line discharge tubing
- Option for 100 ft. (30.5 m) twin-line or 25 ft. (7.6 m) coiled twin-line discharge tubing
- Built in air compressor (1.5 hp)
- 15 micron droplet size at 50 psi (3.4 bar)
- Compact size for portability
- Santoprene, Viton, or Kalrez pump seals for chemical compatibility

SPECS:

power type
electricity

chemical pickup type
draws from pre-mixed solution

number of products unit can draw from
one product

suction line length/diameter
6 ft. (1.8 m) clear hose with 1/4 in. (6.4 mm) inside diameter

discharge hose length/diameter
50 ft. (15.2 m) twin-line tubing 1/4 in. (6.4 mm) outside diameter

discharge wand/tip type
polypropylene trigger handle for liquid output and polypropylene mist nozzle with Kynar tip

output distance
3.4.5 ft (0.9-1.4 m)

output volume
8.96 oz/min at 50 psi (3.4 bar) ? static

flow rate*
8.96 oz/min at 50 psi (3.4 bar) ? static

pump seals
Santoprene, Viton, or Kalrez

droplet size
15 microns at 50 psi (3.4 bar)

coverage area
1 liter of solution will cover approximately 1000 cubic feet

nozzle type
pneumatic mist nozzle

number of nozzles
one

*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

REQUIREMENTS:

Operating air pressure
50-80 psi (3.4-5.5 bar)

Liquid temperature range
40-100?F (4.4-37?C)

Chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

OPTIONS:

MU-JR
PUMP SEAL MATERIAL:
- Santoprene (standard)
- Viton (V)
- Kalrez (K)

HOSE LENGTH:
- 50ft (PSGN130-H50)
- 100ft (PSGN130-H100)
- 150ft (PSGN130-H150)

Add option codes to item number as shown. For standard options, no option code is needed. Example:

- MU-JRV-PSGN130-H100 (unit with Viton pump seals and 100ft hose length)

WHAT'S INCLUDED:

- Complete foam unit
- Twin-line foam nozzle(s) with spray tip(s)
- Adjustable ball-type nozzle insert to hold spray tip
- Mounting hardware for control box and nozzle(s)
- Clear tubing (50 ft. (15.2 m) of 1/2 in. (12.7 mm) outside diameter tubing per nozzle)
- Tee fittings
- User manual

• Model: FOAMIT 9.MU.JR.PSGN130.H50