Product Description
An industrial strength, alkaline cleaner and degreaser concentrate specifically designed for oil removal. Enviro-Clean can be safely used indoors and outside on multiple surfaces such as concrete, brick, plastic and metal.
TYPICAL USES: For Industrial, commercial and residential use on sidewalks, driveways, parking decks, interior/exterior floors, brick, pavers, stucco or any surface that needs cleaning, degreasing or oil removal.
PRODUCT ADVANTAGES: Non-flammable, biodegradable, non-hazardous, non-carcinogenic and economical.
COLOR: Pink
PHYSICAL CONSTANTS:
* Vapor Pressure: N/A
* Vapor density: N/A
* Solubility in Water: Infinite
* Boiling Point: 210 degrees Fahrenheit
* Specific Gravity: 1.05
* Evaporation Rate: Water = 1, Less than 1
* pH: 9
APPLICATION:
Method: Brush, Roll, Spray or Wipe
Theoretical Coverage: Coverage will vary depending on the dilution rate. Light cleaning - 1 part cleaner to 20 parts water, Normal cleaning - 1 part cleaner to 10 parts water, Heavy cleaning - 1 part cleaner to 5 parts water, Grease/oil removal - use straight
SHIPPING & STORAGE:
Container Type: 1 Gallon * 5 Gallon Pail * 55 Gallon Drum
Shipping Weight: 9.4 lbs. * 46 lbs. * 496 lbs.
Average Shelf Life: 5 years minimum from date of manufacture when maintained in protected storage.
Limitations: Apply in good weather when air and surface temperature are above 45 F. and surface temperature is at least 5 F. above the Dew Point. For optimum application properties, materials should be between 70-90 F. prior to application. Maintain unused material in closed containers in protected storage at 40-90 F out of direct sunlight.
SURFACE PREPARATION: Always test before application
APPLICATION INSTRUCTIONS:
1. Dilute according to need on job.
Light Cleaning: 1 part EnviroClean to 20-30 parts water.
Normal Cleaning: 1 Part Enviro Clean to 10-20 Parts water.
Heavy Cleaning: 1 Part Enviro Clean to 5-10 Parts water.
Extra Duty Cleaning: 1 Part Enviro Clean to 1-5 Parts water.
Grease Removal: Use Enviro Clean straight.
Steam Cleaning: 1 part Enviro Clean to 100 parts water.
2. On concrete, agitate surface using a stiff nylon brush, broom or rotating concrete scrubber and a 3000 psi pressure washer.
3. Power wash away all dirt and remaining Enviro Clean Degreaser and rinse well.
4. Repeat on any stubborn stains scrubbing with a stiff nylon bristle brush. Pressure wash with minimum 3000 psi. Manufacturer recommends OSHA Compliance chemical gloves, eye protection
and rubber boots. Rinse everything with plenty of water. Rinse equipment immediately after use.
5. Apply Trojan Masonry Sealer to concrete or masonry to seal surface and to help keep surface cleaner.
Safety: Safe storage, handling and use dictate that adequate health and safety precautions be observed with this product. User is specifically directed to consult the current Material safety Data Sheet for this product as well as precautions contained on product
labeling.
Notice: The technical data contained herein is true and accurate to the best of our knowledge. All products are offered and sold subject to Envirosafe Manufacturing Corps. Standard Conditions of Sale. Published technical data and instructions are subject tochange without prior notice.
|
