Product Description
Double rack, straight-through design. Features include chemical pumps, chemical prime switches, top mounted controls, automatic start/stop, pump purging system, delime switch and a Poly Pro scrap accumulator. Produces 80 racks/hour, utilizes .97 gallons of water per rack and has a 20-1/2" maximum dish clearance.
***Please note this item can have a 3-4 week lead time***
Features:
- 80 racks / 320 covers per hour.
- Large 20-1/2" clearance for dishes.
- Economical to operate. Uses as little as .97 gallons of water per rack.
- All stainless steel construction assures long life and years of trouble free operation.
- Unique spray arm system features upper and lower stainless steel wash arms with reinforced end caps.
- Top mounted controls include built-in chemical pumps and deliming system that assures proper chemical usage.
- Auto start/stop makes operation safe and easy.
- Built-in Poly Pro scrap accumulator with all stainless steel drawer prevents food soil from entering drain system.
- Water inlet comes with built-in strainer, prevents debris from clogging the water valve.
- Dishmachine comes with 2 dishracks.
- Stainless steel impeller offers extended life and service.
- Stainless Steel scrap tray, long lasting.
Low Chemical Alarm is an audible alarm and warning light feature that gives a warning when sanitizer product is nearly empty.
Unique pull-pin design allows wash arms to be easily removed for cleaning.
Pump purging system improves results by eliminating soil and chemical carryover during rinse cycle.
Available Options:
- Solid/Powder Dual Bowl Dispenser
- Temp-Sure heater assures a continuous supply of 140 degrees F hot water guarantees excellent results. Requires a separate 208-240v 3 phase 40 amp power supply.
- Alternative Cycle Times
- Alternative Voltages Available
- Stainless Steel Tables
- Stainless Steel Scrap Trap in lieu of Poly Pro
- Slant Shelf 21"X42"
Dimensions:
Depth 25-1/4" (64Cm)
Width 44-1/4" (112Cm)
Height 59-1/2"-60-1/2" (151.1Cm-153.7Cm)
Standard Table Height 34" (86Cm)
Maximum Clearance For Dishes 20-1/2" (52Cm)
Operating Temperature:
Required 120 degrees F (49 degrees C)
Recommended 140 degrees F (60 degrees C)
Water Consumption:
Per Rack 97 Gal (3.67 L)
Per Hour 77.6 Gph (293.7 Lph)
Water Requirements:
Water Inlet 3/4" (1.9Cm)
Drain-I.P.S. 2" (5.1Cm)
Warnings:
- Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing and Safety codes.
- CMA recommends utilizing a water softening system to maintain water hardness measurements of 3.5 gpg (grains per gallon) or less. This will assure maximum results and optimum operation of the dishmachine.
|
