Product Description
American Dish Service 3-Door, Single Rack, Low Temp, Pass Thru, Three Door Up, Inside Sump.
***PLEASE NOTE THESE DISH MACHINES CAN HAVE A 5 TO 8 WEEK LEAD TIME***
Standard Features
Top mount controls
Great door clearance 20.375"
Quick service 1 1/2 HP pump
Quick release spray arms
Stainless steel air gap
Run indicator light
Simple to clean
Stainless steel impellor and sump
A true LOW-ENERGY dump and fill dishmachine!
Exterior mounted chemical pump heads
Two-stage filter protects pump and spray jets
Stainless steel sump and impeller
1.2 gallons of water per rack
90-second time cycle
37 racks per hour
True 3-door design, with only 2-doors opening in either configuration
Eliminates water on back wall
Doors stay in alignment
Eye-level temperature gauge
Built-in de-liming switch
Large capacity internal scrapper
No-adjustment solenoid replacement
Prime switches
Automatic chemical feed
Nylatron? strips to protect stainless doors
Air Gap Fill - Eliminates the need for check valves and vacuum breakers.
Swift Plumbing Removal - All plumbing is connected using zero-interference Stainless/Terelene Couplers.
Quick Service Pump - Pump slides forward providing for easier repair.
Dual Screens - Protect intake of pump.
L-3DW Pass-thru inside sump with built-in scrap accumulator
L-3DWC Corner inside sump with built-in scrap accumulator
Specifications
L Series Spec (PDF)
Capacities
Rated Capacity: 37 racks/hour
Motor
1.5 HP
Water Consumption
1.2 gallons per cycle or 4.54 liters per cycle
Water Temperatures (Supply)
120 F Min or 49 C Min
Available Cycle Times
90 second cycle
Utilities
Electrical Ratings
115 Volts
Single Phase
Connect to supply source using (2) 10-12 AWG copper wires and a suitable ground. Circuit Protection: 20 AMP. Circuit Breaker or Fuse with a 20 AMP rating.
Caution: Electrical and Plumbing connections must be made by a qualified Service Person who will assure that the installation is in compliance with all available federal, state, and local Health, Electrical, Plumbing, and Safety codes.
*Manufacturer reserves the right to modify specifications in compliance with regulatory agencies and manufacturing expediency.
|
