Product Description
With our Ventless and Energy Recovery option, you can place our TempStar HH-E High Temp Dishmachine virtually anywhere. All you need is a cold water connection, a 60 amp breaker and a drain! Our high efficiency coil accommodates a wide range of water inlet temperatures. At 40 racks per hour, the TempStar HH-E with Ventless and Energy Recovery is one of the highest capacity units on the market.
Measurements: 28.625" x 35.625" x 93"
Weight: 451 LB
Clearance: 27"
Specifications:
Specified unit will be a Jackson TempStar HH-E VER tall chamber ventless high temperature sanitizing door-type dishwasher with two-pass energy recovery system, rated by ETL Sanitation to NSF/ANSI Standard 3. Unit will be ENERGY STAR certified. Unit to be rated for 41 racks per hour, 0.89 gallons per rack, and will include a builtin 70 degrees F rise booster heater with Sani-Sure final rinse system, four (4) selectable timed cycles, 27" chamber clearance, and solid-state controls. Other features include automatic tank fill, door-actuated start, interchangeableupper and lower wash/rinse arms, manual/delime wash mode, vent fan control, and 2 HP stainless steel wash pump motor. Constructed of durable stainless steel with adjustable bullet feet
Features:
- High temperature, electric
- Cleans 40 racks per hour
- Only 0.72 gallons of water per rack
- Four selectable timed cycles
- No vent hood required+
- Cleans 40 (37)* racks per hour, using only 1.36 gallons of water per rack
- More racks per hour than any other ventless door-type machine on the market.
- Exclusive Sani-Sure final rinse system ensures proper sanitation is achieved every cycle
- Built-in 70 degrees F (21 degrees C) rise booster heater is standard, 40 degrees F (4 degrees C) rise available
- Fully automatic, including auto-fill
- Easily accommodates 18"x26" trays
- Self-draining stainless steel pump (no cast iron or plastics) ensures no detergent carryover between wash and rinse cycles
- Field convertible from straight-through to corner and vice versa (kit required)
- Delime/manual wash switch
- Uses standard 20" x 20" (508 mm x 508 mm) racks
- Available in electric only
- Unique, two-pass Energy Recovery System
- Cold water connection only
- Door interlock keeps door locked during cycle
- Built-in 70 degrees F (38.9 degrees C) rise booster heater with water temperature
- Door-actuated start
- 27" (686 mm) vertical chamber clearance accommodates sheet pans and 60-quart mixing bowls
- Specially designed stainless steel nozzles provide superior cleaning action ?Interchangeable upper and lower wash/rinse arms
- Door switch
- 1 HP self-draining stainless steel wash pump motor
- Large scrap basket
- Pressure regulator is provided for installation by others
- Single point connections for all utilities
- Field convertible from straight through to corner and vice versa (kit required)
- Field convertible from 3-phase to single phase and vice versa (kit required)
- Low watt density electric wash tank heater
- Hi-limit thermostat and low water protection
- Detergent/rinse additive signal connection fuse box
- Front stainless steel dress panels
- Uses standard 20" X 20" (508 mm X 508 mm) racks
- Adjustable bullet feet
- Durable stainless steel construction
- Requires some assembly
- 1-year parts and labor warranty
Options & Accessories:
- 460V Electrical
- Single Phase
- Drain Water Tempering Kit
- Water Hammer Arrestor
- False Panel (for corner installations)
- Flanged Feet
- Security Package
- Scaltrol
- Replacement Cartridge for Scaltrol
- 36-Compartment Rack
- 4-1/8" tall (105 mm)
- 5-5/8" tall (143 mm)
- 7" tall (178 mm)
- Combination Rack
- Peg Rack
- Sheet Pan Rack - for 18" X 26" (457 mm x 660 mm) baking pans
*Racks per hour calculated with NSF suggested load time of five (5) seconds for door-type (straight thru)
|
