Product Description
14" Standard Duty, Single Foam Straight Rubber Squeegee, case of 6
This squeegee removes liquid from irregular or grouted floors with confidence. The thick single vinyl Nitrile foam rubber blade provides a quick dry on smooth and uneven surfaces. Made in the USA.
***IMPORTANT PLEASE READ***
***Each case is made to order and normally has a 1-2 week lead time***
It is recommended for use on uneven, grouted floors, and food service areas. It is not recommended for use on abrasive surfaces.
- 16 Gauge plated steel frame
- 1/2" x 1 1/2" single medium density closed-cell foam rubber blade
- All steel frame with rounded corners for protection and safety in shipping
- Equipped with a built in scraper
- Socket accepts a standard 1 1/8" tapered handle
- T-66, 66, and PCT-97 sockets are also available
- The refill blade is the 800 Line
Lengths Available:
0614 - 14" Floor Squeegee
0618 - 18" Floor Squeegee
0624 - 24" Floor Squeegee
0630 - 30" Floor Squeegee
0636 - 36" Floor Squeegee
Physical Properties
Dimension .250"x2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Good
Heat Resistance Good
Resilience or Rebound Fair to Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Poor
Impermeability, Gas Good
Weathering Resistance Fair to Good
Low Temp Limit -10 degrees F to -30 degrees F
High Temp Limit 250 degrees F
Chemical Resistance Properties
Acid Good
Alcohols Fair to Good
Aliphatic Hydrocarbon Solvents Excellent
Alkali Very Good
Animal & Vegetable Oils Very Good
Aromatic Hydrocarbon Solvents Fair to Good
Oil & Gasoline Excellent
Oxygenated Solvents Poor
Water Excellent
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.
|
