Product Description
36" Gray Non Marking Refill Squeegee Blade, case of 12
Gray EPDM blend rubber refill blade is non-marking on light colored floors. The durometer is 55-60 plus or minus 5. This blade has good ozone, chemical and aging resistance properties. It also resists animal and vegetable oils and chemicals. A poor resistance is shown to petroleum based fluids.
***IMPORTANT PLEASE READ***
***Each case is made to order and normally has a 1-2 week lead time***
All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill Blade for 1400, 1400C, 01400, and 01400C Lines .
Lengths Available:
1914 - 14" Refill Squeegee Blade
1915 - 15" Refill Squeegee Blade
1918 - 18" Refill Squeegee Blade
1924 - 24" Refill Squeegee Blade
1930 - 30" Refill Squeegee Blade
1936 - 36" Refill Squeegee Blade
1948 - 48" Refill Squeegee Blade
Physical Properties
Dimension .250"x2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Good
Heat Resistance Very Good
Resilience or Rebound. Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Poor
Impermeability, Gas Fair to Good
Weathering Resistance Excellent
Low Temp Limit -20 degrees F to -60 degrees F
High Temp Limit 300 degrees F to 350 degrees F
Chemical Resistance Properties
Acid Good
Alcohols Fair to Good
Aliphatic Hydrocarbon Solvents Poor
Alkali Very Good
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor
Oil & Gasoline Poor
Oxygenated Solvents Very Good
Water Excellent
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.
|
