Product Description
36" Standard Duty, Red Non-Marking Curved, case of 6
This floor squeegee features a high performance red EPDM rubber blade that resists marking floors. The blade exhibits excellent chemical resistance and high and low temperature properties. Made in the USA.
***IMPORTANT PLEASE READ***
***Each case is made to order and normally has a 1-2 week lead time***
- 16 Gauge curved plated steel frame
- 1/4" x 2" EPDM rubber compound resistant to most animal and vegetable products and by-products
- Engineered for superior push performance
- All steel frame with rounded corners for protection and safety in shipping
- Socket accepts a standard 1 1/8" tapered handle
- T-66, 66, and PCT-97 sockets are also available
- The refill blade is the 2900 Line
Lengths Available:
02118C - 18" Floor Squeegee
02124C - 24" Floor Squeegee
02130C - 30" Floor Squeegee
02136C - 36" Floor Squeegee
Physical Properties
Dimension .250"x2"
Durometer 55-60
Tensile Strength. Very Good
Elongation Good
Compression Set Good
Heat Resistance Very Good
Resilience or Rebound Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Poor
Impermeability, Gas Fair to Good
Weathering Resistance Excellent
Low Temp Limit -20 degrees F to -60 degrees F
High Temp Limit 300 degrees F to 350 degrees F
Chemical Resistance Properties
Acid Good
Alcohols Fair to Good
Aliphatic Hydrocarbon Solvents. Poor
Alkali Very Good
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor
Oil & Gasoline Poor
Oxygenated Solvents Very Good
Water Excellent
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.
|
