Product Description
A low odor, non-corrosive, non-butyl floor sealer and finish remover. Specially designed to remove zinc-free finishes.
***IMPORTANT: This item can have a 3-5 day lead time***
Where To Use
Asphalt Tile, Rubber Tile, Vinyl Tile
Linoleum, Terrazzo, Concrete
Other floor surfaces except wood.
Dilution:
Dilute 1 part product with 5 parts cold tap water.
DIRECTIONS: Dust mop and scrape gum, etc. from floor. Dilute 1 part product with 5 parts cold tap water into a mop bucket. Apply solution generously to a workable area. Allow solution to sit for 5 to 10 minutes. Floor must remain wet. Agitate solution with a floor machine using an aggressive stripping pad (black or brown). If needed, hand scrub edges and corners with an edge pad or center of the scrubbing pad. Remove the old finish and stripping solution with a mop or wet vac. Inspect entire floor to assure stripping has been complete. Reapply to areas that require additional stripping and pick up solution. Allow floor to dry completely prior to applying sealer or finish. Rinsing is not necessary but ensures a good, clean, residue free floor.
FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN. CAUTION! This product has a strong alkaline action and may cause eye burns and skin irritation. For personal protection use safety glasses and rubber gloves. Use with adequate ventilation. Wash after handling. Do not allow this product to come in contact with acids. Undiluted product may damage or discolor surfaces. Do not allow to dry on glass or painted surfaces. Do not move to unmarked containers. Spilled material is slippery. Please rinse empty containers and offer for recycling. Dispose of any excess or unused product and any waste materials according to local, state or federal requirements.
Technical Specifications
COLOR: ............ Colorless
VISCOSITY: ..................Water Thin
FORM: .............. Liquid
STORAGE(Unopened):..1 Year @R.T.
SCENT: ............. None Added
BIODEGRADABLE: ...Yes
pH: .................... 10.7 +/- 0.5
WEIGHT/GAL: ............8.3
FLASH POINT: None
SHIPPING CLASS: ......None
FOAM: .............. Low
PACKAGING: ..............4 gal
TYPE: ................. Floor Stripper
|
