Product Description
16" Neoprene Refill Blade, case of 12
This high-grade serrated Neoprene blade displays an excellent resistance to alkali and a moderate resistance to acids, ozone, oils, fats, greases and solvents. It is recommended for use with petroleum based products. Available with 1/8, 3/16, 1/4, 5/32, 3/8, and 1/2 inch serrations. Standard serration is 3/16. Indicate serration depth when ordering.
***IMPORTANT PLEASE READ***
***Each case is made to order and normally has a 1-2 week lead time***
All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 2300NSE and 02300NSE Lines.
Lengths Available:
2514NSE - 14" Refill Squeegee Blade
2516NSE - 16" Refill Squeegee Blade
2518NSE - 18" Refill Squeegee Blade
2524NSE - 24" Refill Squeegee Blade
2530NSE - 30" Refill Squeegee Blade
2536NSE - 36" Refill Squeegee Blade
Physical Properties
Dimension .250"x2" (400 line is 3 ply x 2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Fair to Good
Heat Resistance Fair to Good
Resilience or Rebound Very Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Good
Impermeability, Gas Fair to Good
Weathering Resistance Very Good
Low Temp Limit -10 degrees F to -50 degrees F
High Temp Limit 225 degrees F
Chemical Resistance Properties
Acid Good
Alcohols Very Good
Aliphatic Hydrocarbon Solvents Good
Alkali Excellent
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor to Fair
Oil & Gasoline Fair to Good
Oxygenated Solvents Poor to Fair
Water Good
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.
|
