30" Heavy Duty Neoprene Slanted Edge Squeege, case of 6


Add to Cart:

Product Description

30" Heavy Duty Neoprene Slanted Edge Squeege, case of 6

The slanted edge squeegee is designed for greater control with applying lighter viscosity sealing material. A high quality 1/4" Neoprene rubber blade enables this unit to be used with petroleum based products. Available with 3" height blades. Made in the USA.

***Each case is made to order and normally has a 1-2 week lead time***

- 14 Gauge red powder coated steel frame
- 5/16" x 3" Neoprene blade
- All steel frame with rounded corners for protection and safety in shipping
- Equipped with a built in scraper
- Aluminum socket accepts a 1 1/8" tapered handle
- Other sockets available
- Replacement blade is N-00BER-3 Line

Lengths Available:
3183NBE - 18" Floor Squeegee
3243NBE - 24" Floor Squeegee
3303NBE - 30" Floor Squeegee
3363NBE - 36" Floor Squeegee
3483NBE - 48" Floor Squeegee

Physical Properties
Dimension .250"x2" (400 line is 3 ply x 2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Fair to Good
Heat Resistance Fair to Good
Resilience or Rebound Very Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Good
Impermeability, Gas Fair to Good
Weathering Resistance Very Good
Low Temp Limit -10 degrees F to -50 degrees F
High Temp Limit 225 degrees F

Chemical Resistance Properties
Acid Good
Alcohols Very Good
Aliphatic Hydrocarbon Solvents. Good
Alkali Excellent
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor to Fair
Oil & Gasoline Fair to Good
Oxygenated Solvents Poor to Fair
Water Good

*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.
  • Model: PROPAVE 3303NBE

30" Heavy Duty Neoprene Slanted Edge Squeege, case of 6

Copyright 2012-24 © Worldwide Janitor ®