Product Description
30" Heavy Duty, Neoprene Applicator Squeegee, case of 6
The petroleum resistant Neoprene rubber blade has a serrated edge for controlled material deposit. Pliancy of rubber blade allows
flexibility of material thickness through pressure and angle applied. Please indicate serration depth when ordering. Serration depths include 1/8, 3/16, 1/4, 5/32, 3/8, and 1/2 inch. Standard serration is 3/16". Made in the USA.
***IMPORTANT PLEASE READ***
***Each case is made to order and normally has a 1-2 week lead time***
- 14 Gauge red powder coated steel frame
- 1/4" x 2" Neoprene rubber blade
- All steel frame with rounded corners for protection and safety in shipping
- Equipped with a built in scraper
- Steel socket accepts a 1 1/8 tapered handle
- T-66, 66, and PCT-97 sockets are also available
- Refill blade is 2500NSE Line
Lengths Available:
2316NSE - 16" Floor Squeegee
2318NSE - 18" Floor Squeegee
2324NSE - 24" Floor Squeegee
2330NSE - 30" Floor Squeegee
2336NSE - 36" Floor Squeegee
Physical Properties
Dimension .250"x2" (400 line is 3 ply x 2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Fair to Good
Heat Resistance Fair to Good
Resilience or Rebound Very Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Good
Impermeability, Gas Fair to Good
Weathering Resistance Very Good
Low Temp Limit -10 degrees F to -50 degrees F
High Temp Limit 225 degrees F
Chemical Resistance Properties
Acid Good
Alcohols Very Good
Aliphatic Hydrocarbon Solvents. Good
Alkali Excellent
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor to Fair
Oil & Gasoline Fair to Good
Oxygenated Solvents Poor to Fair
Water Good
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.
|
