$227.07
Product Description
30" Red EPDM Applicator Squeegee, case of 6
The EPDM rubber blade has a serrated edge for controlled material deposit. Pliancy of rubber blade allows flexibility of material thickness through pressure and angle applied. Please indicate serration depth when ordering. Serration depths include 1/8, 3/16, 1/4, 5/32, 3/8, and 1/2 inch. Standard serration is 3/16". Made in the USA.
***IMPORTANT PLEASE READ***
***Each case is made to order and normally has a 3-5 day lead time***
- 14 Gauge red powder coated steel frame
- 1/4" x 2" EPDM rubber blade
- All steel frame with rounded corners for protection and safety in shipping
- Equipped with a built in scraper
- Steel socket accepts a 1 1/8" tapered handle
- T-66, 66, and PCT-97 sockets are also available
- Refill blade is 2900SE Line
Lengths Available:
2116SE - 16" Floor Squeegee
2118SE - 18" Floor Squeegee
2124SE - 24" Floor Squeegee
2130SE - 30" Floor Squeegee
2136SE - 36" Floor Squeegee
Physical Properties
Dimension .250"x2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Good
Heat Resistance Very Good
Resilience or Rebound Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Poor
Impermeability, Gas Fair to Good
Weathering Resistance Excellent
Low Temp Limit -20 degrees F to -60 degrees F
High Temp Limit 300 degrees F to 350 degrees F
Chemical Resistance Properties
Acid Good
Alcohols Fair to Good
Aliphatic Hydrocarbon Solvents Poor
Alkali Very Good
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor
Oil & Gasoline Poor
Oxygenated Solvents Very Good
Water Excellent
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.
