Product Description
50 gallon air-powered, portable, pre-mix spray unit. Configurable with Viton, Kalrez, or Santoprene seals and color options for hose and cap.
FEATURES:
- draws from pre-mixed solution
- powered by compressed air
- hinged back plate provides tool-free access to components
- quick-change pump
- natural color tank for easy visibility of product levels
- hinged lid
- integrated hose hangers
- front-facing drain
- in-line strainer to protect pump from debris
- color coding options:
- lid ? 9 colors (BK, BL, BN, GN, OR, PL, RD, WH, YL)
- discharge hose ? 4 colors (BL, GN, YL, RD)
SPECS:
power type
compressed air
chemical pickup type
draws from pre-mixed solution
number of products unit can draw from
one product
suction line length/diameter
3/8 in. (9.5 mm) inside diameter
capacity
50 gallons (189.3 liters)
discharge line length/diameter
50 ft. (15.2 m) hose, with 3/8 in. (9.5 mm) inside diameter
discharge wand/tip type
polypropylene spray gun with 25? stainless steel fan tip
output distance
10-12 ft. (3.0-3.7 m)
output volume
2 gal/min (7.6 l/min)
flow rate*
2 gal/min (7.6 l/min)
pump seals
Santoprene, Viton, or Kalrez
product height
43 in. (109.2 cm)
run time from full tank**
approx. 25 min.
wheel type
two 10 inch (25.4 cm) non-marking wheels, two 5 inch (12.7 cm) casters, one with lock
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
**area covered and run time may vary based on humidity, air flow, and product used.
REQUIREMENTS:
compressed air requirements
40-80 psi (3-5 bar) with 2 cfm (56.6 l/min)
liquid temperature range
40-100?F (4.4-37?C)
chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
SP-50N PUMP SEAL MATERIAL
- Santoprene (standard)
- Viton (V)
- Kalrez (K)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- SP-50N (standard unit with Santoprene pump seals)
- SP-50NV (unit with Viton pump seals)
Other available options:
- color coding ? lid +/or discharge hose
WHAT'S INCLUDED:
- complete spray unit with discharge hose and wand
- user manual
|
