Product Description
Wall mounted, air-powered, concentrate spray unit with a stainless steel ball valve. Choose between Santroprene, Viton, or Kalrez pump seals and hose color options.
FEATURES:
- draws from concentrated product
- dilutes product at ratios of 34:1 to 640:1 or 24:1 to 640:1, depending on fan tip used
- powered by compressed air
- quick-change pump
- poly spray gun wand with fan tip
- anti-kink hose protection
- consistent, reliable dilution rates, regardless of changes in water pressure
- color coding options:
- discharge hose ? 4 colors (BL, GN, YL, RD)
SPECS:
power type
compressed air
chemical pickup type
draws from concentrated product
dilution ratio range (water:chemical)*
34:1 to 640:1 with ST2520SS fan tip;
24:1 to 640:1 with ST2550SS fan tip
number of products unit can draw from
one product
suction line length/diameter
8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
discharge hose length/diameter
50 ft. (15.2 m) hose, with 1/2 in. (12.7 mm) inside diameter
discharge wand/tip type
polypropylene spray gun with 25? fan tip
output distance
10-12 ft. (3.0-3.7 m)
output volume
2 gal/min (7.6 l/min) of liquid with ST2520SS fan tip;
4-5 gal/min (15.1-18.9 gal/min) of liquid with ST2550SS fan tip
flow rate*
2 gal/min (7.6 l/min) with ST2520SS fan tip; 4-5 gal/min (15.1-18.9 l/min) with ST2550SS fan tip
pump seals
Santoprene, Viton, or Kalrez
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
REQUIREMENTS:
compressed air requirements
40-80 psi (2.8-5.5 bar) with 2 cfm (56.6 l/min)
water requirements
10-100 psi (0.7-6.9 bar)
backflow prevention is required ? consult local plumbing ordinances for more information
liquid temperature range
40-100?F (4.4-37.8?C)
chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
OPTIONS:
SP-WC PUMP SEAL MATERIAL
- Santoprene (standard)
- Viton (V)
- Kalrez (K)
Add option codes to item number as shown. For standard options, no option code is needed. Examples:
- SP-WC (standard unit with Santoprene pump seals)
- SP-WCV (unit with Viton pump seals)
other available options:
- color coding ? discharge hose
WHAT'S INCLUDED:
- control box assembly
- discharge hose and wand
- mounting hardware
- metering tip kits for spray injector
- stainless steel hose rack
- user manual
|
