Product Description
The BSX1000 is a wet, walk through, dual boot scrubber. This unit is designed for facilities where high throughput is critical. The user activates the system by stepping onto the platform. Diluted cleaning solution is sprayed onto rotating brushes and transferred onto the boots from a stainless-steel venturi dilution valve and metering tip to provide the desired PPM. We recommend using Alpet No-Rinse Quat Sanitizer with the BSX1000 to aid in the cleaning of footwear prior to sanitizing (sanitization can only occur on pre-cleaned footwear). The BSX1000 uses four side disc brushes, two horizontal sole brushes, and two long horizontal sole brushes, while the BSX1000-V uses three vertical brushes, two short horizontal sole brushes, and two long horizontal sole brushes. Both of these configurations provide multiple points of contact between brush and boot. These units are designed for larger spaces and higher traffic applications.
Features:
- Solid member stainless-steel frame construction
- Hinged stainless-steel access grate, and two removable stainless-steel steps
- Brush assemblies remove easily
- BSX1000: Four side disc brushes, two short horizontal sole brushes, and two 33? long horizontal sole brushes
- BSX1000S: Sole brush only
- BSX1000V: Three vertical brushes, two short horizontal sole brushes, and two long horizontal sole brushes
- Stainless-steel electrical enclosure with variable speed drive, timer and e-stop
- Proximity sensor and spring loaded grate for unit activation
- Three stainless-steel washdown-duty rated 1/2hp motors and three worm gear reducers
- Self-draining tub with four adjustable feet
- Solenoid activated brush spray system with Venturi injector for chemistry with flow rated at 2.5 GPM
Connection Requirements:
- 220V ac, single phase, 15-amp electrical connection required
- 3/8" NPTF cold water connection, 50psi recommended
- 2.5" Tri-clamp drain connection
- Model: BEST BSX1000V-DAF-6
|
