Product Description
A non-ammoniated, no-rinse, solvent-based stripper for the removal of metal cross-linked floor finishes from all types of floors.
***IMPORTANT: This item can have a 3-5 day lead time***
Where To Use
Vinyl Tile, Asbestos Tile
Concrete, Terrazzo
Stone, Asphalt Tile
Dilution
Heavy stripping - _ (32 ounces per gallon)
Medium - 1/8 (16 ounces per gallon)
Light - 1/16 (8 ounces per gallon)
Directions
Dust mop and scrape gum, etc. from floor. Determine dilution from the above table and add the appropriate amount of product to cool or room temperature water. Apply solution generously to a workable area. Allow solution to sit for
5 to 10 minutes. Floor must remain wet. Agitate solution with a floor machine using an aggressive stripping pad (black or brown). If needed, hand scrub edges and corners with an edge pad or center of the scrubbing pad. Remove the old finish and stripping solution with a mop or wet vac. Inspect entire floor to assure stripping has been complete. Reapply to areas that require additional stripping and pick up solution. Allow floor to dry completely prior to applying sealer or finish. Rinsing is not necessary but ensures a good, clean, residue free floor.
Technical Specifications
COLOR: ............ Transparent
VISCOSITY: ..................Water Thin
FORM: .............. Liquid
STORAGE(Unopened):..1 Year @R.T.
SCENT: ............. Solvent
BIODEGRADABLE: ...Yes
pH: .................... 13.2
WEIGHT/GAL: ............8.5
FLASH POINT: None
SHIPPING CLASS: ......6.1, packing or III
FOAM: .............. None
PACKAGING: ..............55 gal
TYPE: ................. No Rinse Stripper
|
